|
Q.
|
Are all locations in Hong Kong can receive the radio wave?
|
|
A.
|
It may not be possible to properly receive radio wave at the locations susceptible to generation of radio wave noise or under the following environmental conditions that cause difficulty in receiving radio waves.
(1) Location subject to extremely high or low temperatures.
(2) Inside a reinforced concrete building, between tall buildings or in valleys between mountains or underground.
(3) In car, train or airplane
(4) Near high-tension wires (power lines), railroad overhead wires or airports (communication facilities)
(5) Near a cellular telephone in use
(6) Near household electric appliances or OA equipment such as TV sets, refrigerators, personal computers, fax
machines, etc.
|
| |
|
Q.
|
If the Radio-Controlled watch does not receive the radio wave, does it malfunction or stop?
|
|
A.
|
Even if the Radio-Controlled watch does not receive the radio wave, it can still operate normally with Eco-Drive function and keeps the accuracy of a normal quartz watch.
|
| |
|
Q.
|
Does the Radio-Controlled watch have effects on human body or medical device?
|
|
A.
|
The Radio-Controlled watch only receives radio wave but does not transmit any radio wave. Thus, it does not have any effect on human body and can be used at ease similarly to a common watch, even if you are using a pacemaker or other medical device.
|
| |
|
Q.
|
The latest reception was successful but the watch shows the wrong time. Why?
|
|
A.
|
Check the reference position (base position). Hands may have deviation from the reference position (base position) because of strong magnetism, shocks, etc. Set hands to the reference position (base position) according to the instruction manual.
|
| |
|
Q.
|
Reception starts at the unintended time. Why
|
|
A.
|
Check the setting of AM and PM in Automatic Reception. (Since one of the reception time of Automatic Reception can be set as the customer intends.) If 12 hour display has been chosen rather than 24 hour for normal time display, Automatic Reception time set in reception setting mode is also indicated by 12 hour system. Pay attention to AM/PM and set the reception time correctly.
|
| |
|
Q.
|
The watch is just one hour ahead. Why?
|
|
A.
|
Time difference may be set. Re-set the time difference to "0" according to the instruction manual.
|
| |
